CONTI+ CONFRESH Shower panel for hand showers stainless steel, electric, Fresh water station, Piezo Probes, CNX operation, Thermostat, Hygienic flushing, DN15 CONE0211211356

CONFRESH shower panel, stainless steel, thermostat, piezo switch, DN15, fresh water station

Electronic shower faucet designed as shower panel in nominal diameter DN15. Integrated fresh water station for the production of warm, decentralised and directly in the shower panel produced drinking water. Hot water generation via plate heat exchanger by supplying heating water. With thermostatic mixing device for connection to cold and hot water. Application in new construction building and renovation in commercial, semi-public and public sanitary facilities.

• Stainless steel shower panel. Version with mounting frame to accommodate the water section, including fixing material; cover and mounting frame made of stainless steel 1.4301
• All visible surfaces made of brushed stainless steel
• Adaptive multifunctional water path CONGENIAL with solenoid valve 6 V/DC ROBUST, bistable
• Multifunction tool for maintenance work
• Fresh water station: integrated circulation bridge for heating water circuit
• DVGW-approved proportional flow regulator and differential pressure regulator
• Piping for heating water: Stainless steel corrugated pipe
• Pipelines drinking water: copper and flexible hoses
• Upgrade and retrofitting functions
• Fitting body: dezincification resistant pressed brass, as a high-quality thermostat battery; thermostat handle: chrome-plated brass
• Visible components made of solid, chromed brass, with safety stop
• Choice of temperature and setting range
• Integrated check valve in the bypass and check valve and strainer cartridges for water inlets
• All functional parts can be disassembled from the front during maintenance work without removing the valve body
• Electronic operation of the shower function via piezo button with start/stop function, piezo switch: colour ring red, rosette chromed
• The water flow time of the shower function is easily adjustable.
• Interval hygiene flush to prevent stagnation

Mains (CNX):
Power supply over 30 V/DC power supply in the control panels 64 and 150

Execution options:
CNX Water Management System:
Integration of the shower into the software-controlled Water Management System for the automatic depiction of hygiene, system and safety functions of electronic showers, lavatory faucets and urinal flush valves at the BUS level. Parametrisation of individual devices and device groups. Tamper-proof documentation of all operating, action and function messages.
Hygienic flush (CNX):
The hygienic flush can be set and disabled for electronic showers, integrated into the CNX Water Management System, by the software parameter settings per shower or shower group as interval or calendar function.
Cleaning stop CNX:
The operation stop (cleaning stop), interruption of the shower function, can be set in electronic showers, integrated into the CNX Water Management System, by the software parameter settings per shower or shower group as a calendar function.

Connection voltage (CNX): 30 V/DC

Operating pressure: 1.5 - 5.0 bar
Flow rate DN15: 0.15 l/s (flow rate controller)
Water temperature in standard mode (max.): 70 °C
Hot water heating, standard conditions: With 65 °C heating water supply
Heating flow (max.): 80 °C
Domestic hot water temperature - inlet side: 10 °C
Domestic hot water temperature - outlet side: 45 °C
Heat exchanger pressure drop: 0.22 bar
Water running time setting range: 3 - 180 s
Water running time factory setting: 30 s
Sanitary rinse setting range: 12, 24 or 72 h, or can be disabled - all via piezo pushbutton setting; other sanitary rinse intervals can be set via CNX
Sanitary rinse factory setting: 12 h after the water flow was last triggered, 30 s water running time
Fresh water module output (plate heat exchanger): 35 kW
Dimensions (WxHxD): 220 x 1400 x 80 mm
Material: stainless steel
Electronic IP protection: IP68