CONTI+ Conversion Set Self-closure, Battery operation, 90 mm, DN15 CONS03140000090
Conversion kit shower, oil hydraulic to electronic self-closing function UNI-90, DN15
Electronic shower device, for retrofitting existing showers, shower panels and in-line shower systems with oil-hydraulic self-closing valve. Housing length: 90 mm, with use-dependent and adjustable hygiene flush.
Consisting of:
• Control, programmable, with connection cables and connection plug
• piezo pushbutton: colored ring red, rosettes: Ø 95 mm with mounting holes, high-gloss chrome-plated
• 6 V/DC Solenoid valve ROBUST, bistable, cartridge type, with connecting cable and connector plug
In the case of the mains version, the connecting line must be laid in the protective tube by the customer.
The electrical wiring may only be carried out by a qualified electrician in accordance with DIN VDE 105-100.
Operating voltage: Mains operation: 12-24 V/DC Battery operation: 6 V/DC
Operating pressure: 1.5 - 5.0 bar
Calculated flow rate: 0.15 l/s
Water temperature (max.): 70 °C (briefly 80 °C for thermal disinfection)
Water running time: 30 s factory setting (3 to 180 s), with start/stop function
Hygienic flushing: 12 h/30 s (factory setting) after last actuation (can be set to 12, 24, 72 h or disabled)
For the mains version, route the mandatory connecting cable inside a protective conduit on site. Wiring must be carried out by a qualified electrician according to DIN VDE 105-100.
IP protection: IP68 (electronic components)