CONVARIO shower panel Variocor CNX shelf Thermostat-E, E-control, mains, KWH-flush, cleaning stop, hygienic flush, piezo button, thermostat, DN15 CONE1142219368

High-end shower panel with fully electronic Thermostat-E

The CONTI+ CONVARIO shower element is equipped with the intelligent CONPRIMUS water line and the fully electronically controlled ‘Thermostat-E’ mixing valve, which has numerous hygiene and safety functions.
The connection (wall-mounted) is made to cold and hot water, and settings and programming can be carried out using the CONTI+ CNX water management system.

The CONVARIO shower panel made of high-quality solid surface material - your key to countless design options! Whether in RAL colours, an elegant marble look or for colour accentuation:
CONVARIO opens up completely new possibilities for the colour design of modern shower rooms.

With the fully electronic water circuit, the shower panel offers state-of-the-art technology. Hygiene flushes and separate cold and hot water flushes are possible without any problems, ensuring maximum cleanliness and comfort.

- Pre-installed, electronic high-end CONPRIMUS water line
- Proportional valve Mixing unit Thermostat-E at shower head height
- Electronic scald protection
- E-Control electronic control unit, rotary/push button for mixing and start/stop function
- Optical temperature adjustment with LED display
- Non-linear temperature adjustment
- electronically adjustable memory temperature
- Pre-equipped for shower heads with plug-in connection
- Electronic hygiene flush
- Electronic cold water flush (CNX)
- Electronic thermal disinfection (CNX)

Supply voltage (CNX): 30 V/DC, additionally 24 V/DC

Operating pressure: 2.5 - 5.0 bar
Hot water inlet temperature normal operation (max.): 70 °C
Water temperature therm. Disinfection: short-term, for therm. Disinfection, 80 °C
Flow rate DN15: 0.15 l/s (flow rate regulator)
Flow rate for thermal disinfection DN15: 0.05 l/s
Water run time setting range: 3 - 180 s
Water run time Factory setting: 30 s
Hygiene flush setting range: deactivated at the factory, 24, 48 or 72 h, adjustable via piezo button or CNX
Preset temperatures: Stand-by temperature when the piezo button is triggered 38 °C (can be adjusted from 100 % cold to max. 43 °C (temperature range) by turning the E-Control knob).
If the cold water pipe fails, the water flow is stopped when 48 °C is reached (factory setting - can be set via CNX, note maximum water temperature)
Memory temperature setting: after the end of the shower time (or stop by pressing the piezo button again), the set temperature remains stored for 30 s
Electronic protection class: IP68
Dimensions (in mm): 370x115 mm (WxD), height min. 1400 mm to max. 2500 mm (variable height)