CONTI+ CONPRIMUS Shower panel stainless steel, electric, E-Control - Knob for mixing and start/stop function, APP, Mains operation, Thermostat-E, KWH - Cold Water Flush, DN15 CONE1111219580

CONPRIMUS shower panel, stainless steel, thermostat-E, E-control, DN15

Shower panel with electronically controlled mixing device, including scald protection, for wall mounting. Application in new construction building and renovation in commercial, semi-public and public sanitary facilities.

• Pre-installed electronic mixing unit thermostat-E
• Proportional valve mixing unit at shower head height
• Electronic control unit E-control, turn/push button for mixing and start/stop function
• Electronic scald protection
• Temperature adjustment with LED display
• Non-linear temperature adjustment
• Adjustable shower start temperature
• Time-adjustable memory temperature when showering stops
• Pre-equipped for shower heads with plug-in connection
• Electronic hygiene rinsing (mixed water temperature)
• Electronic hygiene flushing (cold water side) via Service APP
• Control via Service APP possible
• Connection from above or behind
• Incl. mounting material

Mains supply (multiple installation):
Power supply via 24 V/DC power supply unit in surface- mounted version in installation box or for DIN rail mounting

Execution options:
Cold water flush: (Available with software update)
Cold water flush can be set and deactivated per Service APP.
Water flow times:
The water running times of the shower function can be set - via piezo push-button (E-control) or via the Service APP - by the parameter settings per shower.
Hygienic flush:
The hygiene flush can be carried out by programming via piezo push-button (E-control). Via the Service APP, the hygiene flush can be set as an interval or calendar function and deactivated by parameter settings per shower.

Cleaning stop:
The operating stop (cleaning stop), interruption of the shower function, can be set as a calendar function per shower via the Service APP*.

Notice:
Shower head must be ordered separately, shown here as an example with CONHEAD rain shower head SHORTY

Connection voltage (mains): 12-28 V/DC

Operating pressure: 2.5 - 5.0 bar
Flow rate DN15: 0.15 l/s (flow rate controller)
Flow rate for thermal disinfection DN15: 0.05 l/s
Water temperature in standard mode (max.): 70 °C
Water temperature for thermal disinfection: Briefly 80 °C for thermal disinfection
Water running time setting range: 3 - 180 s
Water running time factory setting: 30 s
Sanitary rinse setting range: Disabled at the factory; can be set to 24, 48 or 72 h via piezo pushbutton or Service APP
Preset temperatures: Standby temperature when the piezo button is triggered 38 °C (can be adjusted from 100 % cold to max. 43 °C (temperature range) by turning the E-Control knob).
Anti-scald protection: If the cold water pipe fails, the water flow is stopped when it reaches 48 °C (factory setting - adjustable via Service APP and CNX; observe maximum water temperature)
Memory temperature setting: After the shower time has ended (or the shower has been stopped by pressing the piezo pushbutton again), the set temperature is saved for 30 s
Dimensions (WxHxD): 220 x 1400 x 40 mm
Material: stainless steel
Electronic IP protection: IP68