lino PRIMUS pillar tap L40 thermostat-E, mainsAP, Click, KWH-flush, mains operation AP, with electronic mixing, G3/8 CONE8150308538
lino PRIMUS upright faucet L40, with IR Sensor and electronic mixing unit Thermostat-E, with separate cold water flush, hygienic flush and thermal disinfection
Touchless electronically controlled thermostatic washbasin tap
• Infrared sensor system with fully automatic self-measurement
• Electronic mixing unit Thermostat-E for temperature control as under-table installation on hanger bolts or mounting set
• Connection of cold and hot water, with flexible hoses incl. dirt strainer
• With function key Click short-off (cleaning stop) and continuous-on (filling mode), sensor sensitivity, economy jet regulator (self-cleaning)
• Temporary-off (cleaning) and continuous water flow time (filling of basin) activated by Click
• Temperature and volume regulating servomotors
• Electronic scald protection according to DIN EN 1111
Sensor sensitivity, economy jet controller (self-cleaning)
• Separate cold, mixed and hot water Hygienic flushing via Service APP or integration in CNX Water Management System including documentation
• Integration into CNX Water Management System possible
• Control via service APP possible
Optional:
Extension kit for countertop basins (see accessories)
Notice:
When integrated into the CNX Water Management System, the CNX Converter 6 V must be ordered separately.
When using the Service APP, the BLE Converter must be ordered separately.
Mains surface-mounted: plug-in power supply unit 230 V / 12 V
Operating pressure: 0,3 – 10 bar
Water temperature input (max.): 80 °C
Temperature limit (max.): 42 °C
Flow rate (approx.) 3,8 l/min (3 bar)
Water run-on time: 1 s preset, adjustable with function key 0-12 s permanent on-running time and hygiene flushing running time: set, with function key 0.5-20 min
Continuous water flow and hygienic flush time: 2 min pre-set adjustable with function key Click 0,5-20 min
Cleaning stop: 2 min fixed
Dirt sieves: 0,5 mm mesh size
Pressure hoses: 350 mm
Angle valve connection: G 3/8
Electronic scald protection: In case of cold water pipe malfunction, the water flow is stopped when the temperature reaches 48 °C (factory setting - adjustable via service APP and CNX, pay attention to maximum water temperature).
Standards: DIN EN 200, Noise category I, P-IX 9575 / IA, CE