CONPRIMUS shower panel stainless steel APP HB Thermostat-E, E-control, mains, KWH-flush, cleaning stop, hygienic flush, piezo button, mains operation, thermostat, DN15 CONE1211219580

CONPRIMUS shower panel, stainless steel, thermostat-E, E-control, DN15

Shower panel with electronically controlled mixing device, including scald protection, for wall mounting. Application in new construction building and renovation in commercial, semi-public and public sanitary facilities.

• Pre-installed electronic mixing unit thermostat-E
• Proportional valve mixing unit at shower head height
• Electronic control unit E-control, turn/push button for mixing and start/stop function
• Electronic scald protection
• Temperature adjustment with LED display
• Non-linear temperature adjustment
• Adjustable shower start temperature
• Time-adjustable memory temperature when showering stops
• Hand shower pre-assembled on delivery
• Electronic hygiene rinsing (mixed water temperature)
• Electronic hygiene flushing (cold water side) via Service APP
• Control via Service APP possible
• Connection from above or behind
• Incl. mounting material

Mains supply (multiple installation):
Power supply via 24 V/DC power supply unit in surface- mounted version in installation box or for DIN rail mounting

Execution options:
Cold water flush: (Available with software update)
Cold water flush can be set and deactivated per Service APP.
Water flow times:
The water running times of the shower function can be set - via piezo push-button (E-control) or via the Service APP - by the parameter settings per shower.
Hygienic flush:
The hygiene flush can be carried out by programming via piezo push-button (E-control). Via the Service APP, the hygiene flush can be set as an interval or calendar function and deactivated by parameter settings per shower.

Cleaning stop:
The operating stop (cleaning stop), interruption of the shower function, can be set as a calendar function per shower via the Service APP*.

Notice:
Hand shower must be ordered separately, shown here as an example with CONHEAD rain shower head SHORTY

Operating voltage (mains, multiple installation): 24 V/DC
Operating pressure: 2.0-5.0 bar
Water temperature (max.): 70 °C (Short-term for TD 80 °C)
Water temp. thermal disinfection: Short-term for therm. disinfection 80 °C
Flow rate DN15: 0,15 l/s (flow rate controller)
Flow rate for thermal disinfection DN15: 0.05 l/s
- can be set via Service APP and CNX, observe maximum water temperature). Memory temperature setting: after the end of the shower time (or stop by pressing the piezo button again), the set temperature remains stored for 30 s
Water run time setting range: 3 – 180 s
Water running time factory setting: 30 s
Hygienic flushing setting range: factory setting: deactivated, 24, 48 or 72 h, adjustable via piezo button, CNX or Service APP
Preset temperatures: Stand-by temperature when piezo button is triggered 38 °C (can be adjusted from 100 % cold to max. 43 °C (temperature range) via E-Control rotation. If the cold water line fails, the water flow is stopped when 48 °C is reached (factory setting
Memory temperature setting: After the end of the shower time (or stop by pressing the piezo button again), the set temperature remains stored for 30 s
Electronic protection class: IP68
Dimensions (WxHxD): 220x1400x40 mm